ROLLEIFLEX 2.8 SHUTTER BUTTON NOT WORK PC

The lenses originally offered do not couple with the metering prism a new set was produced which do. The camera uses interchangeable, coated Carl Zeiss (west, Oberkochen) lenses of very high reputation, with focal lengths between 30 mm and 1000 mm. After 1992, only a few collector's editions were made. The SL66SE was released in 1986 with spot or average metering (about 3500 made). The SL66X is similar to the SL66E but with only TTL flash metering (about 500). The magazine back now has ASA settings with a range of 25 to 6400 along with a crank style lever. The lens mounting mark area now has exposure control adjustment. The FP bulb terminal is no longer available. New features include built-in TTL average metering and flash metering (about 500 made) along with a hot shoe. It is built and designed similar to the original SL66 but updated with more electronics. Some more models and 'Special Editions' were produced after 1986. By 1986, about 28,900 of the original SL66 had been made. The SL66 is a very high-quality camera but was very expensive, and rather few were made. Additional scales are on the side of the bellows with markings for 80, 120 and 150mm lenses along with a tilt scale. The is accomplished with a small lockable knob on the front left of the body below the accessory shoe. The unique bellows design also permits the lens to be tilted (up to 8 degrees up or down) to increase depth of field in close-up work. A depth of field scale is printed on the main focusing knob.

The focusing knob is on the left of the body. The shutter release button has a screw in cable release terminal.ДЄ unique feature of the camera is a bellows focusing mechanism. Operation of the crank is similar to their TLR, first with a clock wise rotation, followed by a counter-clock wise rotation. It sits on top of the shutter speed controls. The right side of the body has the film advance knob which has flip out crank. The body controls are located and designed similar to their TLR line of cameras. There are two dedicated sync connectors, one for X electronic and another for FP bulb.

ROLLEIFLEX 2.8 SHUTTER BUTTON NOT WORK PC

The shutter, a focal-plane shutter with cloth blinds, gives speeds 1-1/1000 second plus 'B', and is synchronized for electronic flash at 1/30 sec via body's PC socket. A dark slide holder is built into the magazine, inserting upwards from the base. Remove the dark slide by pulling upwards. To protect against loosing exposures when changing magazines it uses a interlocking dark slide system. The film magazines can accept 120 or 220 film loaded onto inserts. A 4.5Г—6 cm format magazine is also available. It uses interchangeable finders (including a prism and a metering magnifying finder) and film magazines. It is a fully mechanical, modular system camera that does not require battery power for operation. The original chrome & black SL66 model remained in production until 1986. While the naming 'SL' is most likely for single lens, the '66' probably refers to the 6ењ† cm image format, coincidentally the camera was introduced at the 1966 Photokina show. It was the company's first single-lens reflex. The Rolleiflex SL66 is a 6Г—6 cm SLR camera made by Rollei.

Rolleiflex 2.8 shutter button not work